G1-60406
19″ Germany WALL RACK 6U, ลึก 40cm. – ประตูหน้า Acylic ตู้ 3 Part มีลูกกลิ้ง
- Dimension (CM.) WxDxH : 60 x 40 x 32.0
- Produced from Electro-Galvanized Sheet thickness of 1.2mm. Mounting Pole, made of 2.0 mm.
- Mounting Pole were designed to be L-shape angle in order to increase the strength. Punching of square mounting hole 10 x 10 mm. They can be adjusted in/out freely to meet customer’s needs. And Provide the U-height screened on the mounting pole.
- Front Door (for model G1-XXXXX) is the steel frame with acrylic 5.0 mm. thickness with film protection and the width of acrylic is 38 cm. (the height is being influenced by the size of the rack) Door edge is bore with gray dust-proof rubber seal (3 fins). Top the front door has embossed trademark. Security lock with 19″ Germany Master Key. For model G1-XXXXXP is the steel door with perforated capsule ventilation 50% of door’s area.
- Center Part has sliding rail for adjusting the mounting pole throughtout the whole depth of this part. The bottom equipped with rollers. The top has a pre-punch fan pattern for 1 to 3 Fans and on the both side has ventilation grills. Security lock with 19″ Germany Master Key which is the same set as the front door.
- Back Base Box has the clip 10 x 10 cm. for cable access in the top and bottom. Hanger slot for screw on the back part is the two plies steel with 2.4 mm. thickness.
- Hinge is 19″ Germany Export Rack products made from 3 prieces of hig strength special PVC (ABS), rust-free and without any interfering noise. The reversibility of front and rear door opening from left of right by adjusting at one screw nut of hinge.
- New Shine Light Gray Two-Tone color by Electrostatic Powder Coating paint for scratch resistance.
- Screw Set compose of Screws, Captive nuts, Plastic washer; by each were coated with nickel and M6 therad system.
![[19" GERMAN G1-60406]](https://it-easyprice.com/wp-content/uploads/2024/01/28.jpg)
